What it is
900 HS Clear Coat has the best coverage, best durability for harsh and high UV climates with excellent surface hardness and polishing properties, over a 1K Basecoat substrate. Before spraying, remove dust and particles with a tack cloth.
Mixing ratio by temperature
Match the hardener and thinner to the booth temperature. The ratio is always 100 parts 900 Clear Coat to 50 parts hardener, with thinner as follows:
| Temperature | Hardener | Thinner |
|---|
| Below 18°C (64°F) | 901 Fast Hardener | T01 Thinner 5–10 |
| 18–24°C (64–75°F) | 902 Standard Hardener | T01 or T02 Thinner 5–10 |
| 25–30°C (77–86°F) | 902 Standard Hardener | T02 or T03 Thinner 10–25 |
| Above 30°C (86°F) | 903 Slow Hardener | T03 Slow Thinner 10–25 |
Use the mixed clearcoat within its pot life of 3 hours at 25°C.
Application
Apply 2–3 coats at 40–60 µm. Allow 5–10 minutes flash-off at 25°C between coats, and 15–20 minutes air-drying before force drying. Spray gun settings: gravity feed 1.2–1.4 mm, siphon feed 1.3–1.5 mm, conventional 3–4 Bar, RP 2.0–2.5 Bar.
Drying
At 60°C: dust-free in 5 minutes, tack-free in 15 minutes, dry to handle in 30 minutes, dry to polish in 60 minutes. At 25°C: dust-free in 45 minutes, tack-free in 2–3 hours, dry to handle in 10 hours, dry to polish in 16 hours.
Which clearcoat fits your shop?
900 HS is the heavy-duty choice of the Carswell clearcoat range — pick it when your market is harsh with strong UV exposure and you need the best coverage, durability, surface hardness and polishing properties. If your shops compete on show-quality finish and want the deepest gloss and most transparent finish, look at 850 High Gloss Clear Coat. If your shops handle a mixed fleet and need the easiest clearcoat to mix and spray, look at 777 MS Clear Coat. All three share the same drying table, pot life and spray settings — the choice is about finish and climate, not about changing your booth process. Note the one mixing difference: 900 takes 5–10 parts thinner below 24°C and 10–25 parts above 25°C, so your painters need to know the switch on day one.
Get a sample
Ask for a free sample or request a quote. Tell us your booth temperature range and the basecoat system you spray over, and we will confirm the matching hardener and thinner for your shop.